Thinking about installing a Level 2 charger at home in Woodland Hills? That’s a smart move if you own an electric vehicle (EV). A Level 2 charger powers up your car much faster than a regular wall outlet.
But before you call an EV charger installer in Woodland Hills, it’s important to make sure your home’s electrical system is ready.
Here are 8 simple things to know before installing your Level 2 charger:
Is Your Electrical Panel Big Enough?
A Level 2 charger uses more power than regular appliances. That means your electrical panel needs to handle the extra load. If your home still has a 100-amp panel, it might not have enough space.
Many homes need a 200-amp panel to support EV charging safely. Upgrading your panel now can also support future smart home devices.
Do You Have Room for a New Circuit?
Your charger will need its own circuit breaker in the panel. This keeps it safe and separate from the rest of your home’s wiring.
If your panel is full, your electrician might need to install a new subpanel or upgrade the whole panel. A dedicated circuit helps prevent overloads and protects your home’s wiring system.
Use the Right Wires and Conduit
Because a Level 2 charger carries more electricity, it needs thicker wires—usually 6-gauge copper. If your charger will be outside, the wires also need weatherproof protection.
A trained EV charger installer in Woodland Hills can choose the right materials to do the job safely. Using proper wires reduces fire risk and improves overall charger performance.
Safety First: GFCI Protection and Grounding
To avoid shocks, your charger must have proper grounding and GFCI protection (like a safety switch). This makes sure the electricity flows correctly and shuts off quickly if there’s a problem.
An electrician will check this during the installation. Modern GFCI protection is especially important for wet or outdoor locations.
Can Your Home Handle the Load?
Your electrician will run a "load calculation" to see if your house can safely handle the extra energy the charger uses.
This step is usually required before getting a permit for installation in Woodland Hills. Load checks avoid power issues and help keep your system stable.
Pick the Best Spot for the Charger
Chargers can heat up while working, so they need good air flow. Whether it’s in your garage or on the wall outside, your installer will help pick a spot where it’s safe, easy to reach, and convenient for everyday use.
Good placement also keeps charging cables organized and easy to manage.
Get the Right Permits
You might need a city permit before a Level 2 charger installation in Woodland Hills. Your electrician should take care of this for you.
Getting a permit keeps everything legal and safe, and avoids problems later if you sell your house. Permits ensure inspections are done to confirm safe, code-compliant installation work.
Have an Electrician Check Everything
Before the final install, it’s smart to get a full electrical safety check. This helps find any old wiring or overloaded circuits that could cause trouble.
Fixing these now makes your whole home safer. Electrical inspections are affordable and help prevent major future repair costs.
The End Note
Getting a Level 2 charger installation in Woodland Hills is a great upgrade, but it’s not as simple as plugging it in. A licensed EV charger installer will make sure everything is done right, from wiring to permits.
By preparing your electrical system and following the right steps, you’ll be ready to charge your EV quickly, safely, and stress-free.
Absolute Best Electric -
-
Business -
30 views -
0 Comments -
0 Likes -
0 Reviews
